FumiSense Pro-Hi is a handheld Methyl Bromide gas monitor for monitoring fumigation levels inside the fumigated stack/ silo/ ship to ensure the desired level of MBr is present inside. Equipped with an inbuilt air sampling pump capable of drawing a sample from a distance of 30m and a sensor capable of measuring MBr up to 200 g/m3, it is the perfect tool for this application. The backlit OLED display enables the user to read the instrument display even in the dark. With user settable datalogging features, the device logs gas concentration values with date, time and location.
For fumigation monitoring application
Range: 0–200 g/m³
Resolution: 1 g/m³
20×4 OLED display & inbuilt air sampling pump; can draw sample from 30 m
Continuous as well as Batch sampling provision
Data logging facility with information like Gas_conc., Warehouse no., Silo no., Date & Time
USB interface
GUI for data downloading, sorting & report generation
Gas Name: Methyl Bromide
Range: 0–200 mg/l
Resolution: 1 mg/l
Sensors: Non-Dispersive Infrared sensor
Accuracy: Inherently ±2% FS (depends on calibration gas & method)
Drift: Less than 2% of the signal per month at constant temperature and pressure
Sampling modes: Continuous gas sampling; pump remains ON until stopped via SET key
Alarm set point: One user-settable alarm (for low range detectors)
Data Storage: Stores test records with gas concentration & alarm set points along with date & time
Power source: 7.4V mAh Li-ion rechargeable battery pack
Inbuilt Pump Flow Rate: 400–800 ml/min
Power: 3.5V DC, 60 mA
Runtime: About 6–8 hours
Data Transfer: USB communication with computer
Function keys: UP, DOWN, SET & ENTER
Operating temperature: 0 to 40 °C
Display: Large 20×4 Alphanumeric OLED
Instrument Enclosure: High Impact ABS
Size: Height = 205 mm, Depth = 38 mm, Width1 = 108 mm, Width2 = 65 mm
Weight: 500 g
Accessories: Dust filter, battery charger, data downloading cable, outlet coupler
