The Uniphos KwikSense RD enables users to duplicate the transmitter display at a second remote location. This is particularly useful if the gas transmitter is located in a location where its display is difficult to view or in case a second display is required. It can act as a controller and/or as a bridge between the detector and controller.
It comes with an industry-standard RS-485 MODBUS-RTU and 4-20 mA output to connect the controller as well as the detector. All settings can be configured using the supplied non-intrusive magnetic wand.
The KwikSense RD has numerous international certifications including ATEX, IECEx, SIL2, and INMETRO.
Oil, Gas and Petroleum Industry
Petrochemical Industry
Chemical Industry
Pharmaceutical Industry
Marine Industry
Fertilizer Industry
Nuclear Industry
Iron and Steel Industry
Used for remote detection
Analog Industry standard 4-20 mA with Digital communication on MODBUS over RS 485
Temperature Class T4: -20o to +85o Celsius
3 potential free relay contacts
Configuration via non-intrusive magnetic wand
Certification – ATEX, IECEX, SIL2, InMetro etc
Sensor technology: NA (industrial standard 4-20mA input)
Operating Voltage: 18V to 30 VDC
System Type: µController based instrument (non intrusive calibration)
